Ikelite 3944.52 DS-51 Strobe Kit w/ Dual Sync Cord and Arm

The Ikelite Digital SubStrobe DS-51 was created specifically for use with digital cameras because of their use of preflash metering, but it is completely compatible with all film cameras and film camera housings. The DS-51 offers 50 watt-seconds of power in a compact size with coverage adequate for lenses as wide as 28mm, or add the included diffuser for wider coverage and softer lighting. Combine multiple strobes to cover very wide angle lenses with minimal illumination of particles suspended in the water. The DS-51 operates TTL when connected by the included sync cord to some Ikelite housings. Alternatively, the DS51 provides a manual exposure mode with six manual power settings in one-half f-stop increments for precise illumination of subjects. The dual TTL Sync Cord will connect 2 Ikelite strobes to any Ikelite type bulkhead. The Ball Arm System allows easy strobe placement for macro close-up to wide angle lighting. • 50 Watt/seconds power with a guide #28 (underwater at ISO 100) • Operates TTL when connected to some Ikelite housings or manual exposure mode with six manual power settings in one-half f-stop increments • 70° angle of coverage, 80° with diffuser • Recycle time of 3.5 seconds (Full power) • Up to 200 flashes with full power batteries • 5700° Kelvin color temperature • The included dual TTL Sync Cord will connect 2 Ikelite strobes to any Ikelite type bulkhead • The Included Ball Arm System allows easy strobe placement for macro close-up to wide angle lighting